Axel AX3000 70W Installation Guide Manuel d'utilisateur télécharger pdf (Page 17)

Initial Power-On

Installation Guide - Models 70 11

intervention. There are also options to specify various terminal specific

parameters, for example an IP address and terminal name etc.

Note: the auto-configuration mechanism requires minimum version 2.0.2 of

AxRM (available free from www.axel.com

For more information on AxRM’s action in the auto-configuration process, see

the manual "Axel Remote Management - Version 3".

The auto-configuration process is automatically initiated when power is applied

to a brand new terminal or if the terminal is reset to factory defaults. This

process may be aborted by pressing any key.

Note: the auto-configuration may also be started at each terminal boot time.

The stages are:

- Checking the network (link),

- DHCP request sent to obtain an IP address and other parameters

(optional),

- Terminal contacts the AxRM server,

- Firmware file sent (if required), followed by a reboot,

- Configuration file sent, followed by a reboot.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Axel AX3000 70W Installation Guide Manuel d'utilisateur Page 17