Axel AX3000 75C Installation Guide Manuel d'utilisateur télécharger pdf (Page 9)

Installation

Installation Guide - Models 75C 5

Note: when the terminal is installed in a cabinet or rack, it is essential to

maintain air circulation around the VGA/SVGA monitor.

2.2.2 - Ethernet Connection

Plug the RJ45 connector on the end of the 10/100BaseT cable into the socket

labeled LAN on the back of the AX3000 (see chapter 4.1 for technical

specifications and pin assignments).

ETHERNET

ETHERNET CONNECTION INDICATOR LIGHT: this indicator is a green

LED, located on the upper-right corner of the LAN RJ45 connector. It

lights to indicate a satisfactory connection to the Ethernet circuit (server

or hub).

Note: if the green LED does not light, check that the Ethernet connector and

cable both comply with the specifications listed in chapter 4.1.

2.2.3 - Auxiliary Ports

AX3000 Models 75C have three auxiliary ports as a standard feature:

- AUX1: bi-directional serial port, RJ45 connector,

- AUX2: bi-directional serial port, RJ45 connector,

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 24 25

Pas de commentaire

Axel AX3000 75C Installation Guide Manuel d'utilisateur Page 9