Axel AX4010 Installation Guide Manuel d'utilisateur télécharger pdf (Page 10)

Setting-Up the AX4010

________________________________________________________________

Installation Guide - AX4010 Office Server 7

Notes

- The set-up session can also be exited by pressing the administrator

switch (in this case, modifications are discarded).

- During set-up mode, the two leds of the Ch4 port remain lit.

3.2 - FROM A TELNET SESSION

To run set-up within a telnet session, the IP address of the AX4010 must

already be set.

Run the telnet session from any network host.

Use 4096 as the telnet port

The set-up main menu will then display on the console.

When the set-up session has been completed, the AX4010 automatically

terminates the telnet session.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Axel AX4010 Installation Guide Manuel d'utilisateur Page 10