Axel Oxygen 5 Manuel d'utilisateur télécharger pdf (Page 49)

SUB MODULE

ENG

Axel Technology srl www.axeltechnology.com SUB MODULE

The 9 pin D-Type plug remote connector provides the inputs and outputs for the following functions:

- Remote control for On/Off status of MONO Modules with J8 jumper properly set (EXT

position)

- Remote activation of Talk Back circuit

- Remote control of level of all sources connecte to Sub module (duck)

- Signalling of ON status on controlled MONO modules

The SUB Remote interface is especially designed for the connection to DJ CONSOLE

by Axel Technology - see next section

REMOTE ON / OFF CONTROL

To bring to ON status all controlled modules, feed pin 7 of the interface with +6V

voltage. This control is managed in a lateched mode, so that a momentary closing to

+ 6 Vdc activates ON and momentary closing again cancels the ON status.

TALK BACK ACTIVATION

Momentary short circuit of Pin 2 to + 6 Vdc (Pin6) activates Talk Back circuitry on the mixing

console

DUCK

By feeding Pin 3 with a 0 ¸ 6 Vdc Voltage, you can control the Sub module VCA circuitry

(NOTE: EXT(ERNAL) FADER button must ber pressed on the Sub Module)

A +/- 6 VDC +/- 50 mV current-limited output is provided on Pin 6 for use with the remote control inputs.

See DJ CONSOLE chapter for an actual schematic of these controls

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 63 64

Pas de commentaire

Axel Oxygen 5 Manuel d'utilisateur Page 49