Axel AX3000 65 User's Manual Manuel d'utilisateur télécharger pdf (Page 211)

Downloading Firmware

AX3000 - User's Manual 199

11.1.2 - Under Unix

These two protocols are included but not normally enabled by default.

To enable perform the following:

- modify the file /etc/inetd.conf by removing the '#' comment character,

from the beginning of the line(s) associated with tftp and/or bootps

Note: for tftp, take care to use the 'public' mode (within inetd.conf, the

'user' field must be 'nouser' or 'nobody' and the tftpd daemon must be

launched without the '-s /tftpboot' parameter).

- reboot the UNIX host (or send the signal 1 to the inetd process).

Examples of TFTP declarations:

SCO OpenServer

tftp dgram udp wait nouser /etc/tftpd tftpd

AIX 4.x

tftp dgram udp nowait nobody /usr/sbin/tftpd tftpd -n

LINUX

tftp dgram udp wait root /usr/sbin/tcpd in.tftpd /

UNIXWARE 7

tftp dgram udp wait nobody /usr/sbin/in.tftpd in.tftpd

11.1.3 - Under Linux

First, check the tftp package is already installed. The tftp protocol works through

the xinetd daemon. Check if xinetd is running. If not, enable xinetd.

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 275 276

Pas de commentaire

Axel AX3000 65 User's Manual Manuel d'utilisateur Page 211