Axel AX3000 65 User's Manual Manuel d'utilisateur télécharger pdf (Page 51)

Interactive Set-Up

AX3000 - User's Manual 39

- NL=CR+NL Filter: The line feed character 0x0A can be mapped to

carriage return + line feed 0x0D 0x0A,

- Enhanced parameters: see Appendix A.9.3,

- Pre-print String: character string sent before the print job.

- Post-print String: character string sent after the print job (for example

"\0C" is a form feed)

Note: if a serial port is used for printing, set the operating mode to 'Printer'.

For more information about lpd printers, refer to the chapter related to your

operating system in this manual.

3.5.3 - Connecting a Serial Terminal

Two serial terminals can be attached to the AX3000’s serial ports. These serial

terminals communicate with the target host(s) using the AX3000’s embedded

telnet service.

To configure the telnet service for the chosen serial auxiliary port, select the

[Configuration]-[Ports]-[Auxiliary Ports]-[AuxX] dialog and enter the

following parameters:

- Service: select telnet.

- Parameters: press <Space> to access the following box:

- Host: name of the host selected from a menu (see Chapter 3.1.3).

- TCP Port: numeric identifier of the telnet service on the target host.

The TCP Port default value is 23.

- TERM: the value of this variable is 'negotiated', between the host and

the AX3000.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 275 276

Pas de commentaire

Axel AX3000 65 User's Manual Manuel d'utilisateur Page 51