Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur télécharger pdf (Page 167)

Installing under OS/390

AX3000 - User's Manual 153

To set the Prt3270 service, enter the AX3000 Set-Up and select

[Configuration]-[Aux. Ports]-[xxx].

In the displayed box, set the "Associated Service" to "Prt3270", then select "Net

Service Parameters" and press <Space>. The following box is displayed:

These parameters are:

- Server: the server to which the AX3000 opens a printer connection

(press <space> to get a list of available servers).

This parameter must be entered.

- TCP PORT: telnet port of the S/390 server. Default is 23.

- LU Name: system printer name.

- Auto-Connection: set to yes.

- Auto-Reconnection: set to yes.

- Enhanced parameters: see Appendix A.10.3.

- Pre-print String: character string sent before the printing.

- Post-print String: character string sent after an the printing (for example

"\0C" is a form feed)

Note: if the auxiliary port used for printing is a serial port, set the 'Printer'

operating mode and set the associated parameters (baud rate, handshake, etc).

7.4 - REMOTE ADMINISTRATION

7.4.1 - Remote Control

This functionality allows an administrator to remotely take control of a terminal.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 297 298

Pas de commentaire

Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur Page 167