Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur télécharger pdf (Page 187)

Installing under Windows

AX3000 - User's Manual 173

Set the 'Active' parameter to 'As Printer' or 'As Printer and COM'. Then select

'Printer Parameters' and press <Space>. The following box is displayed:

These parameters are:

- Printer Name: name of the Windows printer. (User definable)

- Windows TSE Driver: printer driver name. It is ESSENTIAL that the

value entered here matches the printer driver name exactly as installed

on the server. If the match is not exact Windows will not be able to

connect the printer to the driver and the printer will not be added to the

Windows spooler.

- Time_out (sec): in event of a printer error (no paper, off-line, etc.), this is

the delay before the terminal reports the error to Windows.

The printer declaration is completed. For the redirection procedure, consult the

sub-section c).

b) Declaring a Redirected COM Port

On RDP/ICA connection a redirected COM port will be automatically added to

the Windows server resources. It will be removed on disconnection.

Before being redirected an RDP/ICA COM Port must be declared at the

'physical port' level. The available ports are: auxiliary ports (parallel, Aux1 and

Aux2), USB and network logical ports.

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 297 298

Pas de commentaire

Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur Page 187