Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur télécharger pdf (Page 225)

Remote Administration

AX3000 - User's Manual 211

10.1.1 - Configuring

To set-up the remote control function, select the menu [Configuration]-

[Advanced]-[Tuning]. Within the displayed dialog box select 'Remote Control'

and press <Space>. The following dialog box is displayed:

The parameters are:

- User's Authorization Required: when this parameter is set the remote

control must be allowed by the current user of the terminal.

- Tcp Port: (default: 4098)

- Password (optional): this password will be requested when the

connection will be established.

10.1.2 - Using

Use AxRM to take the control of the terminal.

10.2 - TELNET INTERACTIVE SET-UP

The AX3000 interactive set-up can be accessed through a telnet session. A

specific TCP port is used.

The default value of this TCP port is 4096. This value can be changed. (Select

[Configuration]-[Advanced]-[Tuning] and set "telnet set-up tcp port").

We strongly advise to use AxRM to open the telnet setup. But any telnet client

can open a set-up session to the AX3000. The prerequisite of the telnet client

is:

- ANSI emulation (with color support)

- TERM value: ansi

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 297 298

Pas de commentaire

Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur Page 225