Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur télécharger pdf (Page 151)

Installing under Windows

TCP/IP AX3000 User's Manual 141

available. (See Chapter 8.1.1, Sub-Chapter c). The same printer can be

handled with both LPD and RDP redirection protocols.

The main characteristics of these protocols are:

LPD Protocol:

- The printer must be added to the Windows spooler by the administrator.

- The printer name is static.

- The printer is available when the terminal is powered-on and can be

accessed by any user.

- The printer dataflow is not compressed.

- The display and printer data flows are multiplexed by TCP/IP.

RDP Protocol:

- The printer is automatically created when the RDP session is

established.

- The printer name is static: "terminal name / printer name / session X" (the

session number can varied).

- The printer is only available when the RDP session is established. This

printer is the user default printer. This printer is not "seen" by other users.

- The printer dataflow can be compressed.

- The display and printer data flows are multiplexed by RDP.

The following applies only with LPD printer configuration.

8.3.1 - Setting-Up the AX3000

To set the LPD service on the terminal port, select the [Configuration]→[Ports

aux.]→[xxx] dialog and enter the following parameters:

- Associated Service: select lpd.

- Net Service Parameters: press <Space> to access the following dialog

box:

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 239 240

Pas de commentaire

Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur Page 151