Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur télécharger pdf (Page 169)

Remote Set-Up

TCP/IP AX3000 User's Manual 159

ERR 202: xxx: invalid value.

Command: setup_send

Cause: the value assigned to this set-up parameter (xxx) is not

valid (example: multi_nbpage=10).

Consequence: the set-up parameter is ignored. The current value of this

parameter is retained.

Solution: check the possible values of this parameter (Appendix A.6).

ERR 203: xxx: no place to store udk value.

Command: setup_send

Cause: not enough memory to store the udk_xxx parameter (udk

stands for User-Defined Key; a function key for example).

Consequence: the default value of this udk parameter is restored.

ERR 204: line(s) after the trailer label ignored.

Command: setup_send

Cause: END_AX_SETUP is not the last line of the file.

Consequence: the lines after the trailer label are ignored. The AX3000 set-

up is updated.

Solution: delete these lines.

ERR 211: service name/number error. Service(s) may be reset.

Command: setup_send

Cause: Other services, such as print or tty, use the same identifier

(TCP port or name).

Consequence: to get a consistent configuration, some services have been

removed.

Solution: check service identifier values.

ERR 212: host error. Host(s) may be reset.

Command: setup_send

Cause: host parameters are missing or two host names are

identical.

Consequence: to get a consistent configuration, some hosts may have been

removed.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 239 240

Pas de commentaire

Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur Page 169