Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur télécharger pdf (Page 189)

Appendix

TCP/IP AX3000 User's Manual 179

During this mode the following keys are enabled:

- <CR>: confirmation

- <Esc>: abandon your changes

- <horizontal arrows> move the cursor within the character string

- <Home> and <End>: move the cursor directly to the beginning or the

end of the string

- <Del>: delete the character at the cursor position

- <Backspace>: delete the character before the cursor position

- <Insert>: one of two editing modes:

- insertion (default): the cursor takes the form of a blinking line or

- overwrite: the cursor takes the form of a blinking block.

To enter characters with an ASCII code lower than 20 hexadecimal, use a

backslash ('\') before the hexadecimal value. For instance, the 'Esc z' sequence

can be encoded by '\1Bz'.

Note: when the character string is longer than the length of the field, two

indicators are displayed at the left and at the right of the field.

A.1.4 - Special Notation

The set-up is a sequence of menus and sub-menus. Define an action by the

path followed through the set-up tree (hierarchy), using the following notation:

[item1]→[item2]→[action]

For example, to perform the above action, select item1 in the main menu, then

select item2 in the sub-menu.

A.1.5 - Exiting the set-up

To exit the set-up, select [Configuration]→[Quit].

If changes have been made while in the set-up, a dialog box appears:

- select [YES] to save the modifications and exit the set-up. The new

AX3000 settings will then be stored in NVRAM (non-volatile memory).

- select [NO] to abandon your changes and exit the set-up.

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 239 240

Pas de commentaire

Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur Page 189