Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur télécharger pdf (Page 173)

Downloading Firmware

TCP/IP AX3000 User's Manual 163

11.1.2 - Under Unix

These 2 protocols are included, but the default configuration does not launch

the tftp and bootp daemons. To enable these protocols perform the following:

- modify the file /etc/inetd.conf by removing the '#' comment character,

from the beginning of the line(s) associated with tftp and/or bootps

Note: for tftp, take care to use the 'public' mode (within inetd.conf, the

'user' field must be 'nouser' or 'nobody' and the tftpd daemon must be

launched without the '-s /tftpboot' parameter).

- reboot the UNIX host (or send the signal 1 to the inetd process).

Examples of TFTP declarations:

SCO OpenServer

tftp dgram udp wait nouser /etc/tftpd tftpd

AIX 4.x

tftp dgram udp nowait nobody /usr/sbin/tftpd tftpd -n

LINUX

tftp dgram udp wait root /usr/sbin/tcpd in.tftpd /

UNIXWARE 7

tftp dgram udp wait nobody /usr/sbin/in.tftpd in.tftpd

11.1.3 - Under Linux

First, check the tftp package is already installed. The tftp protocol works through

the xinetd daemon. Check if xinetd is running. If not, enable xinetd.

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 239 240

Pas de commentaire

Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur Page 173