Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur télécharger pdf (Page 91)

Installing under UNIX/LINUX

TCP/IP AX3000 User's Manual 81

In this example, axname is the name of the AX3000 (refer to /etc/hosts file)

and parallel is the Printer Port Name of the AX3000 auxiliary port.

5.3.3 - Using Transparent Mode

One of the three auxiliary ports should be selected as the default printer port

which will be controlled by escape sequences.

Select the [Configuration]→[Terminal]→[General] dialog and set the 'default

printer port'.

This default port can only be used if no network service (lpd, tty, etc) is currently

using it.

Note: the default printer port is also used to perform local printing of the screen

using the <Prt Scr> key.

5.4 - THE AXEL TTY SERVER

5.4.1 - Overview

The TTY server emulates a multi i/o board connection over a TCP/IP

connection. For example using this service a remote printer attached to an Axel

terminal is accessed by Unix as a local printer via /dev/ttyp4, which may be

preferable over using LPD in certain circumstances. Similarly the Axel terminal

can be accessed via a predetermined and fixed /dev/ttyp, which in certain cases

may be preferable over using telnet.

The AXEL tty server is a UNIX daemon (axttyd). The axttyd daemon must be

used with the AX3000 tty or rtty network service.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 239 240

Pas de commentaire

Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur Page 91