Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur télécharger pdf (Page 50)

Interactive Set-Up

40 TCP/IP AX3000 User's Manual

To configure the telnet service for the chosen serial auxiliary port, select the

[Configuration]→[Ports aux.]→[AUXx] dialog and enter the following

parameters:

- Associated Service: select telnet.

- Net Service Parameters: press <Space> to access the following dialog

box:

- Host: name of the host selected from a menu (see Chapter 3.1.2

or 3.2.3).

- TCP Port: numeric identifier of the telnet service on the target host.

The TCP Port default value is 23.

- TERM Value: the value of this variable is 'negotiated', between the

host and the AX3000.

- Auto-Connection: if this parameter is set to 'yes', the connection

will be automatically established when the AX3000 is powered-up.

Otherwise, the user can press any key on the serial terminal

keyboard to establish the connection.

- Auto-Reconnection: if this parameter is set to 'yes', a new

connection is automatically established after a disconnection.

Otherwise, the user can press any key on the serial terminal

keyboard to establish a new connection.

Note: the serial auxiliary port used must be configured for 'bi-directional'

operating mode.

3.5.5 - Connecting other Peripherals

The tty service provides bi-directional control of the device.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 239 240

Pas de commentaire

Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur Page 50