Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur télécharger pdf (Page 49)

Interactive Set-Up

TCP/IP AX3000 User's Manual 39

An lpd printer can be configured with 3 parameters:

- an IP address (the AX3000’s IP address),

- an identifier for the auxiliary port (character string),

- an optional filter to pre-process the file before printing (but generally this

processing is done at the operating system level).

To set the LPD service on an auxiliary port, select the [Configuration]→[Ports

aux.]→[xxx] dialog and enter the following parameters:

- Associated Service: select lpd.

- Net Service Parameters: press <Space> to access the following dialog

box:

- Printer Port Name: this is the port identifier. Sometimes the same

name is used for the printer at the operating system level.

- NL=CR+NL Filter: The line feed character 0x0A can be mapped to

carriage return + line feed 0x0D 0x0A,

Note: if the auxiliary port used for printing is a serial port, set the 'Printer'

operating mode.

For more information about lpd printers, see Appendix A.3.

3.5.4 - Connecting a Serial Terminal

Two serial terminals can be attached to the AX3000’s serial ports. The

terminals communicate with the target host(s) using the AX3000’s embedded

telnet service.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 239 240

Pas de commentaire

Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur Page 49