Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur télécharger pdf (Page 168)

Remote Set-Up

158 TCP/IP AX3000 User's Manual

ERR 106: cmos busy.

Command: setup_send

Cause: another command (setup_get or setup_send) is running, or

another user has entered set-up on the target AX3000.

Consequence: no effect.

Solution: Either wait for a few seconds and repeat the command, or

arrange for the other user to exit set-up on the target

AX3000.

ERR 113: password required

Command: setup_send, ax_reboot and ax_download

Cause: the AX3000 Interactive Set-Up is password-protected. This

password hasn't be specified within the command.

Consequence: no effect.

Solution: use the right password.

ERR 114: invalid password

Command: setup_send, ax_reboot and ax_download

Cause: the AX3000 Interactive Set-Up is password-protected. This

right password hasn't be specified within the command.

Consequence: no effect.

Solution: use the right password.

10.4.2 - Warning Error Messages

Warning error messages do not stop the command but indicate a problem (such

as a syntax error). The following warnings may occur:

ERR 201: xxx: unknown parameter name.

Command: setup_send

Cause: the set-up parameter (xxx) is unknown.

(e.g.: s1_screencolumn instead of s1_screen_column).

Consequence: the set-up parameter is ignored. The current value of this

parameter is retained.

Solution: check the spelling of the set-up parameter (Appendix A.6).

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 239 240

Pas de commentaire

Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manuel d'utilisateur Page 168